Crochet Tulip Hairclip – Easy 3D Floral Crochet Pattern
Give a simple crochet oval a springtime makeover with puff-stitch edging, embroidered greenery, and two raised tulip buds.
Soft cotton stitches, a scalloped border, and tiny three-dimensional crochet tulips turn this hairclip into a charming floral accessory. Its compact oval shape makes it a lovely choice for spring outfits, little girls’ hairstyles, or a handmade seasonal gift.
Inside, you’ll learn how to crochet the oval base, add the textured puff-stitch border, embroider the stems and leaves, and shape two popcorn tulip buds. Clear assembly steps also show how to attach the felt backing and metal snap clip for a neat crochet finish.
Credit Ada’s Handmade
Materials & Tools Needed
Gather the following supplies before starting:
- Yarn: 4-ply combed cotton yarn
- Color A: Cream or off-white for the oval base
- Color B: A contrasting shade for the puff-edge border
- Color C: Light sage or olive green for the embroidered stems and leaves
- Colors D and E: Two petal shades, such as pastel pink and lavender, for the popcorn tulip buds
- Crochet Hook: 2.5 mm
- Hardware: 5 cm metal snap hairclip, also called a BB clip
- Backing Fabric: Non-woven felt sheet in a color matching the base or white
- Notions & Tools:
- Tapestry or yarn needle
- Sharp craft scissors
- Hot glue gun and glue sticks
- Fine-point tweezers for positioning the small flower buds
Finished Size & Color Ideas
The completed hairclip measures approximately 6.5-7 cm long and 3.5 cm wide, including the puff-stitch border.
You can change the yarn shades to create different floral looks:
- Spring Garden: Use a soft mint base, buttercup-yellow edging, and peach and rose tulip buds.
- Vintage Cottage: Choose an oatmeal base, dusty-pink border, and cream and crimson buds.
- Monochrome Chic: Keep the base and border white or ivory, then add bright red or bold yellow tulips.
The crocheted oval can also be attached to an alligator clip, an elastic baby headband, or a safety-pin backing to make a spring lapel brooch.
Crochet Abbreviations & Terminology
This pattern uses standard US crochet terms.
- MR: Magic ring / adjustable loop
- ch: Chain
- sl st: Slip stitch
- sc: Single crochet
- hdc: Half double crochet
- dc: Double crochet
- inc: Increase (work 2 single crochets into the designated stitch)
- st / sts: Stitch/stitches
- YO: Yarn over
- Popcorn: 5-dc popcorn stitch
Before You Begin
The oval base is worked in joined rounds around both sides of a foundation chain. After completing the base, you will add a contrasting puff-stitch border, embroider the green stems and leaves, and make two small popcorn tulip buds.
Keep the flower buds separate until the embroidery is finished. This makes it easier to position the stems and leaves neatly before attaching the raised flowers.
How to Crochet the Tulip Hairclip
Use Color A and your 2.5 mm crochet hook. Begin with a slip knot and work ch 14.
Round 1: Shape the Oval
- Skip the first chain from the hook.
- Work 1 sc into the second chain from the hook.
- Work 1 hdc into the next chain.
- Work 1 dc into each of the next 9 chains, making 9 dc in total.
- Work 1 hdc into the next chain.
- In the final chain, work 3 sc into the same chain space to round the end.
- Rotate your work 180 degrees so you can crochet along the unworked bottom loops of the foundation chain:
- Work 1 hdc into the stitch opposite the previous hdc.
- Work 1 dc into each of the next 9 chain loops, making 9 dc in total.
- Work 1 hdc into the next chain loop.
- Work 1 inc (2 sc) into the very first starting chain space where the first sc was placed.
- Insert your hook into the first sc of the round and work 1 sl st to join.
- Work ch 1 to prepare for Round 2.
Total stitch count: 28 stitches.
Round 2: Expand the Oval
- In the first stitch, which is the same stitch as the join, work 1 inc (2 sc).
- Work 1 sc into each of the next 11 stitches.
- Around the curved end, work 3 inc, placing 2 sc into each of the next 3 stitches. This adds 6 stitches.
- Work 1 sc into each of the next 11 stitches.
- Around the final curved end, work 2 inc, placing 2 sc into each of the remaining 2 stitches. This adds 4 stitches.
- Insert your hook into the first sc of the round and work 1 sl st to join.
- Work ch 1, cut the yarn leaving a 2-inch tail, and pull the tail through to fasten off.
Total stitch count: 34 stitches.
Step 2: Add the Puff-Stitch Scalloped Border
Use Color B to create the decorative edge around the oval.
Join the Contrast Color
- Turn the oval over so the right side is facing you.
- Insert your hook into any stitch along the outer edge.
- Pull up a loop of Color B and work ch 1 to secure the yarn.
Work the Puff Border
- Begin with ch 2.
- Work a 4-loop puff into the exact same stitch:
- Repeat the following action 4 times: YO, insert the hook into the stitch, and pull up a loop to the height of a dc.
- After completing the four repetitions, you will have 9 loops on your hook.
- YO and draw through all 9 loops on the hook at the same time.
- Work ch 1 to lock the puff stitch.
- Skip 1 stitch along the oval edge.
- Work 1 sl st into the next stitch.
- Repeat the following sequence evenly around the entire perimeter: [ch 2, 4-loop puff into the same stitch, ch 1, skip 1 stitch, sl st in the next stitch]
- When you reach the beginning, work a final sl st into the base of the initial ch-2.
- Work ch 1, cut the yarn, and pull it through to fasten off.
- Use a tapestry needle to weave in all yarn ends neatly on the back of the oval.
Puff-stitch tip: Keep the four loops of each puff at a similar height before pulling the yarn through all 9 loops. Consistent loop height helps the scalloped edge look more even around the oval.
Step 3: Embroider the Stems and Leaves
Use Color C, the light sage or olive green yarn, to add the floral details to the center of the oval.
- Thread your embroidery or tapestry needle with Color C.
- Bring the needle from the back of the oval base through the lower-middle section.
- Stitch two straight vertical lines of slightly staggered heights, extending upward toward the top half of the oval. These lines form the two flower stems.
- Near the base of the stems, add two short angled straight stitches branching outward in a narrow V shape to represent the leaves.
- Bring the needle to the back of the crochet fabric.
- Knot the yarn securely against the fabric and trim the excess.
Keep the stems slightly staggered rather than making them exactly the same height. This gives the two tulips a natural arrangement.
Step 4: Make the 3D Tulip Popcorn Buds
Make 2 tulip buds, using Color D for one and Color E for the other. You can also make both buds in the same color if you prefer.
Crochet Each Tulip Bud
- Begin with a Magic Ring (MR).
- Work ch 2. This chain creates the starting height and does not count as a stitch.
- Work 5 dc into the magic ring.
- Slightly pull up the working loop and remove your hook.
- Insert your hook from front to back under both top loops of the first dc you worked.
- Catch the dropped working loop with your hook and pull it completely through the first stitch. This cups the cluster into a popcorn shape.
- Work ch 1 firmly to lock the popcorn stitch into a tight, rounded tulip bud.
- Cut the yarn, leaving a 1-inch tail, and pull it through.
- Pull the starting yarn tail of the magic ring tightly until the center hole closes completely.
- Tie the starting and ending tails together firmly at the base of the bud twice.
- Trim the tails short, taking care not to cut the knot.
Repeat these instructions to make the second bud.
Popcorn bud tip: Make sure the working loop passes completely through the first dc when closing the cluster. This helps the five double crochets form a compact, rounded flower shape.
Step 5: Prepare the Felt and Hair Clip
Once the crochet oval, embroidery, and two tulip buds are ready, prepare the backing for the 5 cm metal snap clip.
- Place the crocheted oval onto a sheet of non-woven felt.
- Trace around the oval and cut out a felt shape approximately 2 mm smaller than the crocheted base, excluding the puff border.
- Fold the felt oval crosswise at the one-third mark.
- Snip a small horizontal slit measuring approximately 5-6 mm.
- Open the 5 cm metal snap clip.
- Slide the narrow top prong through the slit from behind.
- Position the clip so its metal back plate rests against the felt and the clipping tongue remains exposed on the outside.
Check the position of the clip before gluing so the snap mechanism can move freely.
Step 6: Attach the Felt Backing
- Heat your hot glue gun thoroughly.
- Apply a neat layer of hot glue directly over the back of the crocheted oval base. Cover the embroidery knots and yarn tails.
- Align the felt-mounted hair clip with the glued back of the crochet oval.
- Press the felt firmly against the base for 15–20 seconds to create a secure bond.
- Keep the snap clip open while gluing so the moving mechanism does not become stuck.
Allow the glue to set before moving on to the flower buds.
Step 7: Attach the Tulip Buds
Position the two finished popcorn buds at the tops of the embroidered stems.
- Place a generous bead of hot glue at the very top tip of each green stem on the front of the hair clip.
- Use fine-point tweezers to pick up the prepared tulip buds.
- Press each bud firmly onto its glue bead.
- Angle the buds slightly outward to create a natural floral arrangement.
- Hold each bud in place for 10 seconds until the glue sets.
- Remove any remaining hot glue strings.
Take a moment to check that both buds sit securely and that the embroidered stems remain visible beneath them.
Finishing and Final Check
Your crochet tulip hair clip is complete! Before using it, inspect the back and make sure the snap mechanism opens and closes freely without catching on the felt.
Check that the felt backing is firmly attached, the flower buds are secure, and all loose yarn ends have been trimmed. The combination of tight cotton stitches, knotted popcorn buds, and hot-melt bonding helps the clip retain its shape through repeated wear.
Color Ideas and Customization
Changing the base, border, and flower colors gives the same pattern several different looks.
- Spring Garden: Use a soft mint base, buttercup yellow edge, and peach and rose tulip buds.
- Vintage Cottage: Choose an oatmeal base, dusty pink edge, and cream and crimson buds.
- Monochrome Chic: Make the base and border in white or ivory, then add bright red or bold yellow tulips.
You can also coordinate the yarn colors with a child’s favorite outfit or choose shades that match a spring wardrobe.
Other Ways to Use the Crochet Tulip
Although this pattern is designed for a 5 cm snap hair clip, the finished floral oval can be adapted for other accessories.
- Alligator Clip: Attach the crocheted oval to an alligator clip for another hair accessory style.
- Baby Headband: Secure the finished oval to an elastic baby headband.
- Spring Brooch: Add a safety pin backing to wear the tulip design as a spring lapel brooch.
These alternatives let you enjoy the same embroidered tulips and textured border in different ways.








